stream_core module

`stream_core` module#

This module isn’t built by default; it should be enabled with the ‑‑with‑stream configuration parameter.

Packages in our repositories have this module built.

Example Configuration#

worker_processes auto;

error_log /var/log/angie/error.log info;

events {
    worker_connections  1024;
}

stream {
    upstream backend {
        hash $remote_addr consistent;

        server backend1.example.com:12345 weight=5;
        server 127.0.0.1:12345            max_fails=3 fail_timeout=30s;
        server unix:/tmp/backend3;
    }

    upstream dns {
       server 192.168.0.1:53535;
       server dns.example.com:53;
    }

    server {
        listen 12345;
        proxy_connect_timeout 1s;
        proxy_timeout 3s;
        proxy_pass backend;
    }

    server {
        listen 127.0.0.1:53 udp reuseport;
        proxy_timeout 20s;
        proxy_pass dns;
    }

    server {
        listen [::1]:12345;
        proxy_pass unix:/tmp/stream.socket;
    }
}

Directives#

listen#

Syntax:: listen address[:port] [ssl] [udp] [proxy_protocol] [fastopen=number] [backlog=number] [rcvbuf=size] [sndbuf=size] [bind] [ipv6only=on|off] [reuseport] [so_keepalive=on|off|[keepidle]:[keepintvl]:[keepcnt]];
Default:: —
Context:: server

Sets the address and port for the socket on which the server will accept connections. It is possible to specify just the port. The address can also be a hostname, for example:

listen 127.0.0.1:12345;
listen *:12345;
listen 12345;     # same as *:12345
listen localhost:12345;

IPv6 addresses are specified in square brackets:

   listen [::1]:12345;
   listen [::]:12345;

UNIX domain sockets are specified with the :samp:`unix:` prefix

listen unix:/var/run/angie.sock;

Port ranges are specified with the first and last port separated by a hyphen:

listen 127.0.0.1:12345-12399;
listen 12345-12399;

Important

Different servers must listen on different address:port pairs.

`ssl`	allows specifying that all connections accepted on this port should work in SSL mode.
`udp`	configures a listening socket for working with datagrams. In order to handle packets from the same address and port in the same session, the reuseport parameter should also be specified.
`proxy_protocol`	allows specifying that all connections accepted on this port should use the PROXY protocol.

The listen directive can have several additional parameters specific to socket-related system calls.

fastopen=number

enables “TCP Fast Open” for the listening socket and limits the maximum length for the queue of connections that have not yet completed the three-way handshake.

Caution

Do not enable this feature unless the server can handle receiving the same SYN packet with data more than once.

`backlog=`number	sets the backlog parameter in the listen() call that limits the maximum length for the queue of pending connections. By default, backlog is set to -1 on FreeBSD, DragonFly BSD, and macOS, and to 511 on other platforms.
`rcvbuf=`size	sets the receive buffer size (the SO_RCVBUF option) for the listening socket.
`sndbuf=`size	sets the send buffer size (the SO_SNDBUF option) for the listening socket.
`bind`	this parameter instructs to make a separate bind() call for a given address:port pair. The fact is that if there are several listen directives with the same port but different addresses, and one of the listen directives listens on all addresses for the given port (:port), Angie will bind() only to :port. It should be noted that the getsockname() system call will be made in this case to determine the address that accepted the connection. If the backlog, rcvbuf, sndbuf, ipv6only, reuseport, or so_keepalive parameters are used then for a given address:port pair a separate bind() call will always be made.
`ipv6only=on` \| `off`	this parameter determines (via the IPV6_V6ONLY socket option) whether an IPv6 socket listening on a wildcard address [::] will accept only IPv6 connections or both IPv6 and IPv4 connections. This parameter is turned on by default. It can only be set once on start.
`reuseport`	this parameter instructs to create an individual listening socket for each worker process (using the SO_REUSEPORT socket option on Linux 3.9+ and DragonFly BSD, or SO_REUSEPORT_LB on FreeBSD 12+), allowing a kernel to distribute incoming connections between worker processes. This currently works only on Linux 3.9+, DragonFly BSD, and FreeBSD 12+.

Caution

Inappropriate use of this option may have its security implications.

so_keepalive=on | off | [keepidle]:[keepintvl]:[keepcnt]
configures the “TCP keepalive” behavior for the listening socket.

`''`	if this parameter is omitted then the operating system’s settings will be in effect for the socket
`on`	the SO_KEEPALIVE option is turned on for the socket
`off`	the SO_KEEPALIVE option is turned off for the socket

Some operating systems support setting of TCP keepalive parameters on a per-socket basis using the TCP_KEEPIDLE, TCP_KEEPINTVL, and TCP_KEEPCNT socket options. On such systems (currently, Linux 2.4+, NetBSD 5+, and FreeBSD 9.0-STABLE), they can be configured using the keepidle, keepintvl, and keepcnt parameters. One or two parameters may be omitted, in which case the system default setting for the corresponding socket option will be in effect.

For example,

so_keepalive=30m::10

will set the idle timeout (TCP_KEEPIDLE) to 30 minutes, leave the probe interval (TCP_KEEPINTVL) at its system default, and set the probes count (TCP_KEEPCNT) to 10 probes.

preread_buffer_size#

Syntax:: preread_buffer_size size;
Default:: preread_buffer_size 16k;
Context:: stream, server

Specifies a size of the preread buffer.

preread_timeout#

Syntax:: preread_timeout timeout;
Default:: preread_timeout 30s;
Context:: stream, server

Specifies a timeout of the preread phase.

proxy_protocol_timeout#

Syntax:: proxy_protocol_timeout timeout;
Default:: proxy_protocol_timeout 30s;
Context:: stream, server

Specifies a timeout for reading the PROXY protocol header to complete. If no entire header is transmitted within this time, the connection is closed.

resolver#

Syntax:: resolver address … [valid=time] [ipv4=on|off] [ipv6=on|off] [status_zone=zone];
Default:: —
Context:: stream, server, upstream

Configures name servers used to resolve names of upstream servers into addresses, for example:

resolver 127.0.0.53 [::1]:5353;

The address can be specified as a domain name or IP address, with an optional port. If port is not specified, the port 53 is used. Name servers are queried in a round-robin fashion.

By default, Angie caches answers using the TTL value of a response. The optional valid parameter allows overriding it:

valid

optional valid parameter allows overriding cached entry validity

resolver 127.0.0.53 [::1]:5353 valid=30s;

By default, Angie will look up both IPv4 and IPv6 addresses while resolving.

`ipv4=off`	disables looking up of IPv4 addresses
`ipv6=off`	disables looking up of IPv6 addresses
`status_zone`	optional parameter, enables statistics collection for specified zone

Tip

To prevent DNS spoofing, it is recommended configuring DNS servers in a properly secured trusted local network.

resolver_timeout#

Syntax:: resolver_timeout time;
Default:: resolver_timeout 30s;
Context:: stream, server, upstream

Sets a timeout for name resolution, for example:

resolver_timeout 5s;

server#

Syntax:: server { … }
Default:: —
Context:: stream

Sets the configuration for a server.

status_zone#

New in version 1.0.0.

Syntax:: status_zone zone;
Default:: —
Context:: server

Enables collection of status information in the specified zone. Several servers may share the same zone.

stream#

Syntax:: stream { … }
Default:: —
Context:: main

Provides the configuration file context in which the stream server directives are specified.

tcp_nodelay#

Syntax:: tcp_nodelay on | off;
Default:: tcp_nodelay on;
Context:: stream, server

Enables or disables the use of the TCP_NODELAY option. The option is enabled for both client and proxied server connections.

variables_hash_bucket_size#

Syntax:: variables_hash_bucket_size size;
Default:: variables_hash_bucket_size 64;
Context:: stream

Sets the bucket size for the variables hash table. The details of setting up hash tables are provided in a separate document.

variables_hash_max_size#

Syntax:: variables_hash_max_size size;
Default:: variables_hash_max_size 1024;
Context:: stream

Sets the maximum size of the variables hash table. The details of setting up hash tables are provided in a separate document.

Built-in Variables#

The stream core module supports following variables:

`$angie_version`#

Angie version

`$binary_remote_addr`#

client address in a binary form, value’s length is always 4 bytes for IPv4 addresses or 16 bytes for IPv6 addresses

`$bytes_received`#

number of bytes received from a client

`$bytes_sent`#

number of bytes sent to a client

`$connection`#

connection serial number

`$hostname`#

host name

`$msec`#

current time in seconds with the milliseconds resolution

`$pid`#

PID of the worker process

`$protocol`#

protocol used to communicate with the client: TCP or UDP

`$proxy_protocol_addr`#

client address from the PROXY protocol header
The PROXY protocol must be previously enabled by setting the proxy_protocol parameter in the listen directive.

`$proxy_protocol_port`#

client port from the PROXY protocol header
The PROXY protocol must be previously enabled by setting the proxy_protocol parameter in the listen directive.

`$proxy_protocol_server_addr`#

server address from the PROXY protocol header
The PROXY protocol must be previously enabled by setting the proxy_protocol parameter in the listen directive.

`$proxy_protocol_server_port`#

server port from the PROXY protocol header
The PROXY protocol must be previously enabled by setting the proxy_protocol parameter in the listen directive.

`$proxy_protocol_tlv_` name#

TLV from the PROXY Protocol header. The name can be a TLV type name or its numeric value. In the latter case, the value is hexadecimal and should be prefixed with 0x:

$proxy_protocol_tlv_alpn
$proxy_protocol_tlv_0x01

SSL TLVs can also be accessed by TLV type name or its numeric value, both prefixed by ssl_:

$proxy_protocol_tlv_ssl_version
$proxy_protocol_tlv_ssl_0x21

The following TLV type names are supported:

alpn (0x01) - upper layer protocol used over the connection
authority (0x02) - host name value passed by the client
unique_id (0x05) - unique connection id
netns (0x30) - name of the namespace
ssl (0x20) - binary SSL TLV structure

The following SSL TLV type names are supported:

ssl_version (0x21) - SSL version used in client connection
ssl_cn (0x22) - SSL certificate Common Name
ssl_cipher (0x23) - name of the used cipher
ssl_sig_alg (0x24) - algorithm used to sign the certificate
ssl_key_alg (0x25) - public-key algorithm

Also, the following special SSL TLV type name is supported:

ssl_verify - client SSL certificate verification result, 0 if the client presented a certificate and it was successfully verified, non-zero otherwise.

The PROXY protocol must be previously enabled by setting the proxy_protocol parameter in the listen directive.

`$remote_addr`#

client address

`$remote_port`#

client port

`$server_addr`#

an address of the server which accepted a connection
Computing a value of this variable usually requires one system call. To avoid a system call, the listen directives must specify addresses and use the bind parameter.

`$server_port`#

port of the server which accepted a connection

`$session_time`#

session duration in seconds with a milliseconds resolution

`$status`#

session status, can be one of the following:

`200`	session completed successfully
`400`	client data could not be parsed, for example, the PROXY protocol header
`403`	access forbidden, for example, when access is limited for certain client addresses
`500`	internal server error
`502`	bad gateway, for example, if an upstream server could not be selected or reached
`503`	service unavailable, for example, when access is limited by the number of connections

`$time_iso8601`#

local time in the ISO 8601 standard format

`$time_local`#

local time in the Common Log Format

stream_core module

Contents

stream_core module#

Example Configuration#

Directives#

listen#

preread_buffer_size#

preread_timeout#

proxy_protocol_timeout#

resolver#

resolver_timeout#

server#

status_zone#

stream#

tcp_nodelay#

variables_hash_bucket_size#

variables_hash_max_size#

Built-in Variables#

$angie_version#

$binary_remote_addr#

$bytes_received#

$bytes_sent#

$connection#

$hostname#

$msec#

$pid#

$protocol#

$proxy_protocol_addr#

$proxy_protocol_port#

$proxy_protocol_server_addr#

$proxy_protocol_server_port#

$proxy_protocol_tlv_ name#

$remote_addr#

$remote_port#

$server_addr#

$server_port#

$session_time#

$status#

$time_iso8601#

$time_local#

`stream_core` module#

`$angie_version`#

`$binary_remote_addr`#

`$bytes_received`#

`$bytes_sent`#

`$connection`#

`$hostname`#

`$msec`#

`$pid`#

`$protocol`#

`$proxy_protocol_addr`#

`$proxy_protocol_port`#

`$proxy_protocol_server_addr`#

`$proxy_protocol_server_port`#

`$proxy_protocol_tlv_` name#

`$remote_addr`#

`$remote_port`#

`$server_addr`#

`$server_port`#

`$session_time`#

`$status`#

`$time_iso8601`#

`$time_local`#